There are many types of light box advertisements. Different specifications and types are installed in different ways. Now let Xiaoxing give you a detailed introduction to the installation methods of different advertising light boxes
Installation method of hanging advertising light box:
1. First, determine the installation position of the light box, and determine the corresponding installation method according to the actual situation and the variety of the light box. Try not to install directly. Otherwise, due to different sizes and breeds, the donkey lip may not be on the horse's mouth. [lamp box power supply]
2. Measure the size of the light box and determine the fixing point for installing the light box according to the position of the mounting hole on the back of the light box or the actual size on site. Be sure to measure carefully.
Hanging advertising light box
3. Fixed advertising light box:
1. if the wall on the spot is aluminum plastic plate, wood plate, stainless steel plate, etc., it can be fixed immediately with self tapping screws.
2. if the on-site wall is concrete or wall, it can be drilled with an impact electric drill first, and then fixed with expansion bolts.
3. if the wall on site is floor tile, natural marble, laminated glass, etc., the glass drill can be used to drill through the surface layer first, then drill the expansion bolt hole, and then fix the fixed advertising light box or use the method of glue.
4. Wiring: the outlet of the power line of the normal light box is at the back of the light box. When the power supply configured on site is at the back of the light box, cut off the power plug, connect directly, and fasten it with insulating tape (pay attention to safety when wiring or energizing). If the power supply is outside the setting range of the light box, it is necessary to connect the outlet line of the power supply to the edge of the light box [light box power]
5. Fixing the light box: open the upper cover of the light box, drill holes at the power line position of the light box base, reinstall the power line, and adjust the level ruler to the horizontal state to avoid distortion and affect the appearance. A6. After power on adjustment, clean the surface of the light box after the light is on.
Be sure to pay attention to safety during installation to avoid accidental injury caused by improper operation
Scan the code to follow
